Water efficiency: How manufacturers can reduce water consumption through optimisation

By Ollie Brown and Tom Purkhardt
Water efficiency specialists at BIP.Verco

With demand for production growing, water costs rising, and water scarcity causing increasing concern about utility unavailability and closures, manufacturers need a strategy for reducing the water consumption they rely on.

In this article, we unpack how manufacturers can use various methods to reduce the amount of water a site consumes. Implementing these methods means a site can:

  • maintain (or increase) levels of production without concern over water scarcity; and
  • reduce the cost of water purchase and use.

How can manufacturers reduce water consumption?

There are multiple ways to do this. Here, we'll focus on three of them: optimisation, reuse and recycling.

1. Why should manufacturers optimise water use, and how can they do this?

Historically, water optimisation has been overlooked, as manufacturers prioritised
carbon and energy. This means there are often large, untapped benefits to developing a water optimisation strategy, and positive change can be seen quite quickly.

The most straightforward way to optimise water use is to:

  • map the way water significantly moves through a site;
  • pinpoint areas at which water is being lost, wasted, or used inefficiently; and
  • develop plans to address these issues, streamlining the water flows.

As an example, let’s focus on variability.

For the same process, such as a cleaning or Clean In Place (CIP) protocol, there can be large variances in how much water is used.

A good first step is to:

  • understand what good days and bad days generally look like for each process;
  • work out the reasons for the differences between the two; and
  • prioritise ensuring that what is done well on the good days can be done more consistently in the future.

If you’re unsure about how to do this, BIP.Verco’s consultants can help. Our team of experts can support you with mapping your water use, spotting inefficiencies, and implementing measures that drive savings.

Find out more about our water efficiency services

2. How can manufacturers reuse water efficiently?

Water reuse involves using the same water multiple times without significant treatment, for example by moving it from one process to another suitable use.

The most efficient way to reuse water at a site is to start as early in the flow as possible. The earlier in the journey, the cleaner the water is, and the smaller the chance of it being mixed with dirty streams. This means less time and money will be spent on processing when it's reused.

The most efficient sites form strong cascades where water from a process that is relatively clean is then used for another, and it cascades down the system.

Some examples are:

  • reusing CIP ‘flush’ water for the initial CIP ‘rinse’ stage;
  • using RO retentate for CIP or for cooling towers; and
  • reusing grey water from CIP systems for flushing toilets.

3. What are the biggest challenges for manufacturers trying to recycle water, and how can they overcome them?

The process for recycling water can be complex, but the hard work pays off: if you're trying to achieve a certain reduction, recycling water offers the largest prize.

The main challenges for water recycling projects are:

  • Working with complex legislation
    Relevant legislation is complicated, and there’s a lack of assistance available for manufacturers trying to make sense of it. Expert advice is needed at this stage.
  • Building a successful business case

    There are several factors that need to be included in a business case to get it to the decision stage. If the right factors aren’t included, or the information is compiled incorrectly, it's challenging to prove that projects will pay back.

  • Selecting appropriate technology
    Recycling water effectively requires the use of specific technology. Knowing which kinds of technology to select, from a large range of different options, is key. But again, specialist advice is often required for busy teams looking to make these changes.

As challenging as the above can be, the benefits of recycling water are numerous. For example, recycling:

  • reduces the amount of new water that needs to be purchased and brought in;
  • improves the site's resilience to droughts and supply restrictions;
  • helps increase output and progress towards the company's goals.

How can BIP.Verco help identify and support water reuse and recycling opportunities?

Our team of expert sustainability consultants worked with the University of Cambridge to develop a tool to help improve the business case for water recycling projects.

When provided with inputs, such as type and volume of water, the tool gives advice on relevant legislation, which technologies are applicable, and whether there is a valid business case.

It helps give businesses a quick one-stop shop to figure out if there is genuine potential for a project before they invest too much time and energy.

If you’d like to hear more about the tool, or see a demonstration, please get in touch.

Contact us about the tool

Get expert advice on water efficiency at our upcoming webinar

If you'd like to hear more from Ollie and Tom, they're presenting a webinar on this topic. Here's what you need to know:

Turning water scarcity into opportunity

Date: Tuesday 17th November
Time: 14:00-15:00 GMT

During this webinar, BIP.Verco experts will explore how to:

  • understand your water use and make water projects pay back;
  • identify 'low-hanging fruit' water efficiency opportunities;
  • make sense of the water recycling/reuse conundrum; and
  • select the appropriate technology to help you use and monitor water more efficiently.

Register now

More articles in this series

Frequently asked questions about using water efficiently through reuse and recycling

How can manufacturers improve water efficiency?

Manufacturers can improve water efficiency by:

  • understanding where and how water is used across their operations;
  • identifying avoidable consumption;
  • optimising processes and equipment; and
  • assessing opportunities to re-use or recycle water.

Mapping water flows can help organisations identify and prioritise the water efficiency projects that could have the greatest impact. BIP.Verco's consultants can help develop utility distribution maps that map water flows in this way. Get in touch to find out more.

What is the difference between water reuse and water recycling?

Water reuse involves using water again without significant treatment, for example by cascading relatively clean water from one process into another suitable use. Water recycling involves treating used water so that it can be used again, which may require specific technologies depending on the water quality and intended application.

How can water efficiency consultants help manufacturers reduce water use?

Water efficiency consultants can help manufacturers:

  • map water flows;
  • identify where water is being lost, wasted or used inefficiently; and
  • find opportunities for optimisation, reuse and recycling.

BIP.Verco’s consultants can also support manufacturers in assessing water recycling technologies, legislation and the business case for potential projects.

Experts on the topic